Electrostatic Sprayers
With the electrostatic technology being utilized as a backpack or mounted on a cart, one can swiftly apply an electrostatic charge to various surfaces in order to dispense disinfecting chemicals (PX10 tabs). This device uses an air compressor for quiet, powerful liquid flow. The charge causes the molecules of the liquid to bend and wrap 360 degrees around all surfaces it touches. The charge on the droplet is very small, but the force spraying towards the target is up to 75 times greater than the force of gravity. Upon activation, the droplets reverse direction, and move upwards against gravity, while passing a target surface, known as “the electrostatic wraparound.”
The backpack has a voltage at 16.8V, optimum spray distance of 4-6ft, a tank capacity of 2.25 gallons, nozzle spray sizes of 40 micron full cone, 80 micron full cone, 110 micron 120º fan, a flow rate of 40 micron / 3.4 oz. per minute 80 micron / 5.1 oz. per minute 110 micron / 13.4 oz. per minute. The sprayer has an electrical option of 220V, a flow rate of 40 microns, tank pressure of 12-15 PSI (pounds per square inch), and air line pressure of 30 PSI with a drop size of 40 microns and a spray range of 8-12 ft.
Hydroxyl Generator
With the combination of the Hydroxyl Maximizer and generator, it is possible to eliminate odors in occupied areas faster, by producing hydroxyl radicals. This method of odor neutralization is safe for use in occupied areas. The Hydroxyl Generator utilizes water vapor in the atmosphere to create these hydroxyl radicals.
The technology works by creating a reaction between UVA, Ti02 and H20 to break apart the water molecule and create a single hydrogen atom and OH (hydroxyl radical). Voltage: 110V, Cycles: 50/60 Hertz, and amperage: 4 amps, fan output: 5,000 CFM (cubic feet per minute) or roughly 17ft with a maximum treatment area of 40,000 cubic ft. or roughly 34ft, and a treatment area of 40,000-50,000 cu ft (or roughly 34-36ft).
Air Scrubber
Air scrubbers can take care of the air quality in your home or business. They remove a variety of hazards, including airborne pathogens and allergens, or even mold spores, pollen and dust mites. Air scrubbers are especially good at cleaning up mold, dust, and other contaminants. They can also be used to filter the air that leaves your home or office each time you open a window or door, keeping the airflow clean while protecting your health inside. Each air scrubber can cover rooms as large as 1000 square feet with a variable speed airflow of up to 700 cubic feet per minute (CFM) or roughly 9ft, multiple air changes: delivers 6 air exchanges/ 1 hr to rooms 1000 square feet or less.
Maximum noise level 65 db (decibels), amperage of 1.5-3 amps, maximum wattage 210W and 110-120 V for its voltage capability. The HEPA vaccuum, with up to 10ft hose length has a voltage of 110-120 volts, 21 gallon tank. The HEPA dehumidifier functions at 110-120 Volts, with a flow rate of 235 CFM (cubic feet per minute) or roughly 6ft, and has a built in heat sensor, 1-1/2" diameter crush proof hose with dual swivel cuffs that stretches from 4' to 7' ft, and 50' 16/3 gauge extension cord with lighted ends.
Crawl Space 60 FT Camera
This inspection device is a powerful, multi-system inspection camera that can reach and explore spots in crawl spaces and attics as small as 1ft in height, drains, vents, ducts and other hard-to-see areas with HD 1200TVL (horizontal pixels on color monitor) and DVR function. With 12 LED (light-emitting diode) lights with adjustable brightness and two covers for the camera providing extra protection, this product will work anywhere narrow underground environments are found to help identify the most harmful organic compounds in your home or work environment.
Cable length of 61m/ 200ft, camera size 23 mm x 120 mm with in. front size 45mm, and an HD 1200TVL camera, with an adjustable LED and view angle of 120°, and work temperature of -4°F (-20°C) to 140°F (60°C), and a storage temperature of -58°F (-50°C) to 140°F (60°C).
Infrared Camera
Infrared cameras are excellent tools in the fight against moisture intrusion, as they can find hidden problems before they become too costly to fix. By spotting moisture issues quickly and easily, infrared cameras help ensure that you’ll be able to stop damage before it becomes too great or costly.
Muti-function meter with 19200 pixel resolution and a thermal sensitivity of (<70 mK milli Kelvin). This device has a +/- 2.5% thermo-hygrometer RH accuracy (relative humidity accuracy), with a pinless scale of 0-100 numerical reference.
Protimeter Moisture Meter
The Protimeter is a premium range of professional moisture measuring instruments for surveyors, flooring contractors and assessors. The instrument will measure using radio waves to detect data through surfaces including wallpaper, paint and even tiles without penetrating the wall surface. This allows our team to undertake a very quick reading without damaging the surface. This device is non-invasive with no penetration, meaning there are no needles to mark the surface.
The Protimeter is not adversely affected by moisture. The depth of this device reaches up to ¾ of an inch, with a relative range of 0-999 moisture level reading. The radio frequency measures with a nominal depth of 10-20mm (millimetre) with a dual display of both LCD (liquid crystal display) and LED (light-emitting diode) which is ideal for checking the condition of moisture within floors, solid walls, and other hard-surfaced building elements.
Psychrometer Humidity - EXTECH
The Psychrometer Humidity takes both a wet-bulb and a dry-bulb temperature reading. With those two values known, through computation or by reading a psychrometric chart, the other properties of the air can be determined.
The instrument also displays relative humidity and dew point temperature readings. Built-in infrared thermometer for non-contact temperature measurement to 932º with 30:1 distance to target ratio. Max operating temperature 2501.6°F (1372ºC) and minimum -148°F (-100ºC). 4 outputs and overall highest RH accuracy of 2%. Temperature function for contact temperature measurement of 2501ºF (1372ºC).
Particle Counter
Particle counters are one of the most common designs used for air quality monitoring and classification in cleanrooms. Also known as optical particle counters, these monitors measure particle number concentrations and size range to validate mechanical filtration systems, identify sources of contamination and ensure that air quality objectives are met. Optical particle counters are capable of monitoring particles in the air and liquids. Using a high energy light source, particles are measured and counted when the light source is blocked out.
Measures particle sizes down to 0.3 µm (micrometre) with a channel of particle sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10μm, flow rate: 0.1ft3 (2.83L/min) controlled by internal pump and efficiency counting of 50% @ 0.3µm (micrometre); 100% for particles >0.45 (less than), air temperature of -14 to 140ºF (-25 to 60ºC); Accuracy: ±2ºF/1ºC, with a relative humidity at 0 to 100%RH (relative humidity accuracy); Accuracy: ±3% RH (40% to 60%RH) and dew point/ wet bulb of 32 to 122ºF (0 to 50ºC).
Laser Thermometer
This high-quality, hand-held laser thermometer is an excellent tool for measuring the temperature of metals, ceramics, graphite and other materials. The temperature range includes measurements from -50°C (-58 °F) to 1650°C (3002°F), so it can be used to evaluate many things from detecting hot to cool spots in mold assessment and extraction processes. A Laser Guided precision device with an infrared lens and accuracy of -58F to 68F: ±2% or 2°C 68F to 212F: ±1% or 1°C 212F to 716F: ±1.5% or 1.5°C, and response time wavelength of 500ms (meter per second) (8-14)μm (micrometre). Adjustable emissivity (0.1 to 1.0), and a distance spot ratio of 12:1.
Digital Air Flow Meter
A powerful, yet simple to use instrument for quick measurement of mass flow and volumetric flow rate. It is primarily used to measure if there is a sufficient amount of air flow entering the AC unit. This device includes a function for detecting wind chill and 8 sensitive vanes for measuring HVAC (Heating, ventilation, and air conditioning) installation, CFM (cubic feet per minute) calculation, ducts and vents.This highly accurate meter also displays gas temperature and atmospheric pressure, for both air and oxygen - all in real-time.
Designed with a touch screen interface for easy customization and accurate readings, this instrument is vital to the mold assessment process. A Pro Anemometer, AP-007 anemometer range from 0.3~30m/s, Resolution: 0.1m/s;0.2℃, with low battery indication, wind chill function, Measure wind speed in 5 units: m/s, km/h, ft/min, knots, mph (meters per second, kilometer per hour, feet per minute, knots, miles per hour). Wind temp in ℃/℉,(14℉ to 113℉/-10℃-45℃). With an Accurate Wind Meter The max wind speed range 67.1 mph(+/- 5% of readings), The Wind temperature -10~45℃,14℉-113℉(+/-2℃,35.6℉).
Vector Fog
A battery operated spraying machine with a powerful spray distance of 26ft, along for specialized sanitization and disinfecting. With its main feature, this device produces a cold fog to compress pesticides or disinfectants through the nozzle of the device, therefore generating a cold mist aerosol. This machine’s average particle size is anywhere from 5-50 microns, allowing the decontamination process to be finite and effective.
This machine makes it ideal for disinfection and pest control in both private or commercial spaces. It can be used to apply repellents, disinfectants, biocides, insecticides, fungicides, and more with point-and-spray ease. Voltage: 110/220V, with a flow rate of 20 LPH (Liters per Hour), and a tank capacity of 2L (0.5 Gal.). It performs at 1250 watts and utilized oil and water-based chemicals to work mose efficiently.
HEPA Vacuums
HEPA vacuums use high efficienty filters to trap particles such as viruses, bacteria, mold, dust and dander, among other invasive organic and inorganic matter to help purify the air and whisk away dangerous particles in the air. Dehumidifiers help remove moisture in the air in order to prevent the presence of mildew build up and keep the environment less likely to encourage mold growth and balance humidity levels between 45% and 55%.
The HEPA vaccuum, with up to 10ft hose length has a voltage of 110-120 volts, 21 gallon tank. The HEPA dehumidifier functions at 110-120 Volts, with a flow rate of 235 CFM (cubic feet per minute) or roughly 6ft, and has a built in heat sensor, 1-1/2" diameter crush proof hose with dual swivel cuffs that stretches from 4' to 7' ft, and 50' 16/3 gauge extension cord with lighted ends.
Dehumidifier / Dry Vac
HEPA vacuums use high efficienty filters to trap particles such as viruses, bacteria, mold, dust and dander, among other invasive organic and inorganic matter to help purify the air and whisk away dangerous particles in the air. Dehumidifiers help remove moisture in the air in order to prevent the presence of mildew build up and keep the environment less likely to encourage mold growth and balance humidity levels between 45% and 55%.
The HEPA vaccuum, with up to 10ft hose length has a voltage of 110-120 volts, 21 gallon tank. The HEPA dehumidifier functions at 110-120 Volts, with a flow rate of 235 CFM (cubic feet per minute) or roughly 6ft, and has a built in heat sensor, 1-1/2" diameter crush proof hose with dual swivel cuffs that stretches from 4' to 7' ft, and 50' 16/3 gauge extension cord with lighted ends.
LED Fiber Optic Snake Camera
The LED (light-emitting diode) Fiber Optic Snake Camera is a power tool for inspecting small openings, cracks and crevices in tight spaces with effortless precision. Smaller than the traditional endoscope camera, the LED (liquid crystal display) Fiber Optic Snake Camera allows technicians to confidently reach into places inaccessible to your regular inspection camera such as air conditioning duct and vent systems. We use this camera to gently inspect areas that are hazardous, inaccessible or difficult to see by using a fiber optic cable. A digital image transmits through the camera via the cable, and is displayed on a monitor at the end of the cable.
This device has a 4.3-inch color LCD, with a horizontal viewin angle of 70°, and a 40-500mm (millimetre) focal length. Waterproof level of IP67 (electrical enclosure rating), and a lens diameter of 8mm with a lithium battery, 18650, 3.7V (volts), 2600mAh (milliampere hour). The technology works by creating a reaction between UVA, Ti02 and H20 to break apart the water molecule and create a single hydrogen atom and OH (hydroxyl radical). Voltage: 110V, Cycles: 50/60 Hertz, and amperage: 4 amps, fan output: 5,000 CFM (cubic feet per minute) or roughly 17ft with a maximum treatment area of 40,000 cubic ft. or roughly 34ft, and a treatment area of 40,000-50,000 cu ft (or roughly 34-36ft).
Hydrosensor
A collapsobale and portable instrument used for identifying the moisture levels in specific spaces. Using an LED (light-emitting diode), light at the base of the device, we can identify the exact percentage of moisture present using nickel-plated points based on the light and a beeping sound that is automatically activated when the moisture content is above 17% during the assessment process. LED light sensor with telescoping arm extension of 31” and 17” for portability purposes. 1-piece stainless steel shaft.
Thermo Fogger
This device creates a disinfectant mist that permeates all the surfaces in its area in order to reduce and elimiate disturbing odors. It is a unique instrument due to the heated fog that is emitted as it allows for these cleaning solutions to clean not only surfaces, but airborne pathogens as well. This piece of equiment is used for large areas especially, as it functions as a vital companion to everyday cleaning solutions for more intense disinfecting.
Fogger flow rate of Thermal 1,000 cu. ft./min. (or 10ft per min), Cold: 30 ml/min (milliliters per minute), and .75 gallons of tank capacity, 8 Amps average, and a droplet size of Thermal: 13.5 Cold: 115 microns, and a voltage of 110-120 V.The Protimeter is not adversely affected by moisture. The depth of this device reaches up to ¾ of an inch, with a relative range of 0-999 moisture level reading. The radio frequency measures with a nominal depth of 10-20mm (millimetre) with a dual display of both LCD (liquid crystal display) and LED (light-emitting diode) which is ideal for checking the condition of moisture within floors, solid walls, and other hard-surfaced building elements.
Air Quality / Pollution Monitor
The Air Quality Monitor accurately assesses temperature in Celsius, humidity level, and multiple measures of air quality. It can be used to monitor indoor air quality. The device is portable and easy to use offering fast information on a number of key indicators that affect human comfort and health such as formaldehyde, TVOC,(Total Volatile Organic Compounds), and PM1.0/PM2.5/PM10 levels (Fine Particulate Matter levels).
This device helps to prevent total natural & synthetic volatile organic compounds causing most odors, and fine particulate dust matter from traveling depply into the respiratory tract which can reach the lungs if not monitored properly. Battery powered device with 2.8” 320 x 240 pixel color LCD ( (liquid crystal display), including -HCHO (Formaldehyde): 0-1.999 mg/m³, TVOC: 0-9.999 mg/m³ (milligrams per cubic meter), and PM1.0/PM2.5/PM10: 0-999 μg/m³ (Micrograms per Cubic Meter of Air).
Zefon Bio Pump Air Sampler with Tripod
A tripod holds the main instrument which is used to analyze measurable data of an environment’s airflow rates. With its calibration tool, the measurements are detected electronically using its backpressure sensitive pumps. Our licensed technician can take an air sample that can be run for up to 5-10 minutes, or a swab sample from a direct area of concern which are then sent to a third party labratory to determine whether the airborne spores are elevetated or not.
This device uses an NiMH (Nickel-metal hydride) battery with a display type: 2-line LCD (liquid crystal display), and a flow range of: 15 L/min (liters per minute); the calibrator has a range of 2.5 to 300 L/min and is accurate to ±2% of reading.
